"I think it's got a great future… we're going to see more of it."
Project Background Building a new facility was not an easy decision for the Human Resources Development Commission of Allegany County, Maryland. The private, not-for-profit organization operates and assembles funding for a wide range of programs aimed at improving the lives of the young, poor, elderly and disabled.
Its board of directors decided to build a new headquarters only after an in-depth study revealed that a new building would be the most cost-effective long-range solution to its needs. In particular, the organization needed its new headquarters to decrease its occupancy costs – something they could achieve by erecting a LEED-approved facility that was both cost-effective and environmentally friendly.
That made the accel-E™ Steel Thermal Efficient Panel (S.T.E.P.) wall system an attractive choice for architect Gary Moshier.
"I have always liked products that give you a better quality building envelope, and this seemed like a good way to go," said Moshier, a partner in Moshier Studio of Pittsburgh, which designed the 20,000-square-foot multi-story facility. "We gave the contractor a few options, and the fact that they ended up choosing the accel-E™ panels just reinforced that it was both cost- and time-effective."
"Accelerated Building Technologies has been great to work with….
The technical support has been fantastic." – Bud Curry, Rycon Construction
Energy Efficiency Yields Long-Term Value The accel-E™ S.T.E.P. system overcomes many common causes of poor energy efficiency by fusing specially designed steel studs and expandable polystyrene (EPS) insulation together into a single continuous panel system. This eliminates air gaps and irregularities that can greatly diminish the performance of conventional framing and insulation.
Slots in the framing members allow insulation to mold through the steel, which further reduces thermal bridging and heat transference, blocks air intrusion, and adds thermal resistance. As a result, the accel-E™ panels offer tested insulating values that far surpass traditional framing, sheathing and batt wall assemblies.
The S.T.E.P. system's steel framing members are made of recycled steel, and are themselves recyclable. In addition, the EPS insulation does not shrink, settle, emit harmful gases, or contribute to diminished air quality. As a result of these factors, and the significant reduction of jobsite waste, the S.T.E.P. wall system contributes points to as many as four LEED® categories – a fact that greatly influenced the HRDC board's decision, according to Moshier.
"I think it was a combination of the energy performance, plus fewer joints for a more controlled joining system than other alternatives," he said. "Plus the fact that these panels contributed to LEED points in the energy efficiency category was a positive."
Immediate Benefits During Construction
Replacing conventional framing, sheathing and insulation with the accel-E™ STEP wall system also streamlines the construction process and can reduce labor and onsite disposal costs. Window and door openings are pre-cut, and the open cavity simplifies the installation of electrical, plumbing and mechanical systems.
"A competing system offered a solid foam design, but we would have had to cut channels for the electrical and plumbing subcontractors later in the process," explained Bud Curry, superintendent for Rycon Construction, the general contractor on the project. "The accel-E™ system allows us to do all the conduits for plumbing and electrical without cutting foam. That was a great help to us."
Curry added he expects to be using the system again.
"I think it's got a great future, and I'm sure we're going to see more of it," he said, adding: "Accelerated Building Technologies has been great to work with. They gave us a lot of help, were always courteous, and always took the time to walk us through things and answer any questions. The technical support has been fantastic."
Learn more about accel-E™STEP wall systems by visiting www.accel-E.com,
or call 888-9-accelE (888-922-2353).
###
About accel-E™ Theaccel-E™panels are produced in thicknesses of 5 and 8 inches, and can be produced in virtually any height, limited only by the mode of transport. The materials used in the panels resist mold and mildew. Developed and marketed by Accelerated Building Technologies, LLC, the accel-E™system fully complies with both the 2006 International Building Code (IBC) and the 2006 International Residential Code (IRC). Accelerated Building Technologies, LLC, was formed by two leading building materials manufacturers, combining the talent, resources and knowledge of both NOVA Chemicals and Dietrich Metal Framing. Accelerated Building Technologies maintains ownership of the accel-E™system under SYNTHEON Inc., a wholly-owned subsidiary of NOVA Chemicals Inc., and utilizes Dietrich Metal Framing as its exclusive steel component provider.
